Need Fisher IC PA-501 for my Fisher 4/2 Channel receiver Model 143 9760600 and Schematics Thank you.
replace with SANYO IC STK025 or STK032 or STK036
The above information is mostly incorrect. Only the STK036 would work (rated at 50 watts). The others are rated at 25 watts.
You will probably have trouble finding a PA501 or an STK036.
Hi i dont know if this is to old,
im trying to fix a old fisher that uses the PA 501 Bybrid-IC
i have a STK082 in stock i have pinouts for it, but i cant find pin out info anyplace for pa 501 to see if there the same
this unit had 4 of them, only 1 is bad. looking for a sub any help on this would be fantastic
i noted you stated STK036 and also hard to find. :(
Design and Content © HiFi Engine 2006-2016
FAQ | Site Policy