Harman Kardon Citation 1
Stereophonic Preamplifier Control Center
The Harman Kardon Citation I stereo preamplifier represents the culmination of extensive research and experimentation. The keynote is unparalleled performance, and no compromise has been made in the design of this magnificent instrument.
Every feature demanded by the professional has been incorporated, and several new ones added. Each is important to the proper operation of your system.
Features include separate Bass and Treble step type tone controls for each channel. The controls are completely out of the circuit when in the flat position to eliminate phase shift and transient distortion inherent in all tone controls. Special treble cut contains scratch filter for sharp roll-off without ringing.
Each amplification stage is flat over an extremely wide range and is surrounded with a feedback loop, resulting in unmeasurable distortion and phase shift.
All operating controls arranged in logical grouping to facilitate operation.
Frequency response: 5Hz to 80kHz
Total harmonic distortion: 0.05%
Input sensitivity: 2.5mV (MM), 100mV (ceramic), 200mV (line)
Signal to noise ratio: 85dB (line)
Output: 300mV (line), 2V (Pre out)
Valve complement: 9 x ECC83/12AX7, 5 x ECC81/12AT7
Dimensions: 14-7/8 x 12-1/4 x 6 inches
Finish: charcoal brown and gold
Accessories: optional walnut enclosure
instruction/owners manual (en) - smilingbuddha33
assembly instructions (en) - smilingbuddha33
schematic (en) - NotBananas
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Harman Kardon. If you wish to purchase a Citation 1 please contact the company via their website or visit an authorised retailer.
Harman Kardon Pre Amplifiers