Solid State Stereo Integrated Amplifier
The VN-900 features 220W power output, power bandwidth of 20Hz to 20'000Hz, phono input loading, S.E.A control system, S.E.A record switch for tape recording and dual facilities for tape monitoring and tape dubbing.
Power output: 50 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 50kHz
Total harmonic distortion: 0.05%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 200mV (line)
Signal to noise ratio: 56dB (MM), 86dB (line)
Output: 180mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 39 x transistors, 16 x diodes
Dimensions: 5-3/8 x 16-5/8 x 12-1/2 inches
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by JVC. If you wish to purchase a VN-900 please contact the company via their website or visit an authorised retailer.