Marantz Model 18
With the exception of the cathode ray tube, the model eighteen is an all transistor receiver, based on the same advanced circuits used in the Marantz model 10B tuner, 7T solid state pre-amplifier and 15 solid state power amplifier.
It's circuitry includes 72 transistors and 76 diodes, a total of 149 solid state devices.
A tuner, pre-amplifier and power amplifier make up the three basic components mounted on a single chassis and sharing a common power supply.
Internal connections between these components have been designed to provide optimum performance from each component while retaining full flexibility.
The model eighteen allows the connection of two pairs of loudspeakers, headphones, a turntable and record changer, an additional tuner, a TV sound source, and two tape recorders for record, playback and tape copying functions.
It's flexibility will allow other connections to be made for special applications and it's performance is the equal of the finest separate component system of comparable power.
Tuning range: FM, MW
Power output: 40 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.2%
Damping factor: 30
Input sensitivity: 1mV (MM), 100mV (line)
Signal to noise ratio: 80dB (line)
Channel separation: 35dB (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 18-1/4 x 6 x 16 inches
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Marantz. If you wish to purchase a Model 18 please contact the company via their website or visit an authorised retailer.