Stereo Tape Cassette Recorder (1977)
The Pioneer CT-F8080 features a fast and easy front panel operation, achieved through carefully apportioned control layout and Pioneer's original vertical cassette transport system. Simple stand up cassette loading makes handling effortless.
Tape motion during record and playback is regulated by a superbly stable DC servo controlled motor, while a high torque mechanical governor equipped motor drives fast forward and rewind.
Precision design and finishing of the capstan, belt large size flywheel and tape take-up mechanism assure outstanding performance in terms of flutter and stability.
The CT-F8080 direct change system allows any mode (record, play, fast forward, rewind) to be selected without alternating with the stop switch.
Operating convenience becomes additionally increased, while tape is protected from undue stress.
Type: 2-head, single compact cassette deck
Track System: 4-track, 2-channel stereo
Tape Speed: 4.75 cm/s
Heads: 1 x record/playback, 1 x erase
Motor: 1 x playback/record, 1 x fast wind
Tape Type: type I, FeCr, Cr02
Noise Reduction: B
Frequency Response: 20Hz to 17kHz (Cr02 tape)
Signal to Noise Ratio: 63dB (dolby B)
Wow and Flutter: 0.07%
Total Harmonic Distortion: 1.5%
Input: 60mV (line), 0.2mV (mic)
Output: 0.45V (line)
Semiconductors: 63 x transistors, 41 x diodes, 4 x FET,
Dimensions: 420 x 165 x 349mm
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Pioneer. If you wish to purchase a CT-F8080 please contact the company via their website or visit an authorised retailer.