Stereo Integrated Amplifier (1976-77)
The Pioneer SA-7500 is a 2-channel integrated stereo amplifier with inputs for two turntables, a tuner, auxiliary source and two tape loops.
Power output: 40 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.3%
Damping factor: 25
Input sensitivity: 7.5mV (mic), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 65dB (mic), 70dB (MM), 90dB (line)
Output: 150mV (line), 30mV (DIN), 1V (Pre out)
Semiconductors: 2 x FET, 35 x transistors, 21 x diodes
Dimensions: 420 x 150 x 345mm
Accessories: connecting cord
Power output: 45 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 40kHz
Total harmonic distortion: 0.1%
Damping factor: 30
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 73dB (MM), 95dB (line)
Output: 150mV (line)
Semiconductors: 2 x IC, 26 x transistors, 17 x diodes
Dimensions: 380 x 139 x 308mm
Accessories: connecting cord, hex wrench
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Pioneer. If you wish to purchase a SA-7500 please contact the company via their website or visit an authorised retailer.