hifi engine

Library / Pioneer

Pioneer SA-9800

Integrated Stereo Amplifier (1980-1981)

Pioneer SA-9800

Description

The Pioneer SA-9800 has the impressive feature which is the NSA (non switching amplifier), created specially by Pioneer.

This is a type of amplifier that adopts the merits of both class A and class B amplifiers, and it excels in keeping down the heat loss and allows the transistors to operate all the time in the active region.

For this reason, a high output power with a very low distortion factor is yielded all the way up to the high frequencies.

Specifications

Power output: 100 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.005%

Damping factor: 55

Input sensitivity: 0.1mV (MC), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 72dB (MC), 90dB (MM), 110dB (line)

Output: 150mV (line), 1V (Pre out)

Semiconductors: 3 x IC, 6 x FET, 73 x transistors, 36 x diodes

Dimensions: 453 x 155 x 425mm

Weight: 18.4kg

Year: 1980

Downloads

HG service additional (en)

instruction/owners manual (en)

service manual (en)

SG service additional (en)

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Pioneer amplifiers

Comments

Pioneer SA-9800

thnks !!!!

from argentina !

diagram

plz send me a sa 9800 circuit diagram

SA-9800

Thanks

Pioneer SA9800

Hi,

I am classic Audio Gear collector. I bought Pioneer SA9800 in faulty condition found one channel completely gone bad on power amp side. I hope to fix it with the help of Service manual on hifi engine. Don't know if required spares/components will be available!

Thank you,
Sachin

pioneer 9800

do you still have it if you didnt fix it im looking for the light meters mine quit will you sale me one if you have one or do you know someone who does thaks dave

Pioneer SA 9800 replacement potentiometer

Does anyone know where I can get the volume control for the sa 9800 amp, part number acw 119? Alternatively of a supplier that will do a replacement dual ganged pot? I believe that there is an extra 'tap' for the loudness circuit????

Chris
(London)

volume control for sa9800

HI, YOU CAN FIND IT ON eBAY, I RECOMEND U TO ASK FOR THE SPECIAL ITEM, THAT IS: STEREO , FOUR LEG VOLUME CONTROL 100KOHM LOG SCALE, SOMETIMES IT APPEARS AS 100KB.

LET ME KNOW IF U GET IT OR NOT, I MAY GET A SUBSTITUTE FOR YOU, K?

CHEERS :) bernard.

 

This website is not affiliated with or sponsored by Pioneer. To purchase a SA-9800 please contact the company via their website or visit an authorised retailer.