Rack Mount Stereo Pre-Amplifier (1976-77)
The Spec-1 has differential amplifier circuitry incorporated in the equalisation and tone control amplifiers.
This is complemented by a dual positive and negative power supply system for all amplifier sections, which provides improved DC balance and stability, while eliminating click noises due to switching.
An electronic muting circuit, employing a reed relay, blocks surge noise associated with power switch operation.
Frequency response: 10Hz to 70kHz
Total harmonic distortion: 0.03%
Input sensitivity: 2.5mV (mic), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MM), 90dB (line)
Output: 150mV (line), 2V (Pre out)
Semiconductors: 50 x transistors, 33 x diodes
Dimensions: 480 x 186.5 x 365mm
Accessories: connecting cord, hex wrench
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Pioneer. If you wish to purchase a Spec-1 please contact the company via their website or visit an authorised retailer.
Pioneer Pre Amplifiers