Stereo Power Amplifier
The Spec-4 employs DC construction which excludes capacitors from the NFB circuits and uses a dual transistor differential amplifier with a current mirror circuit in the 1st stage.
This provides a stable operation and also high gain over a wide frequency range.
The pre-driver stage is a class A circuit with a regulated current circuit for the load.
This makes for high gain amplification with superior linearity.
Furthermore, there is an overdrive limiter and power limiter circuit which is designed to protect the power transistors and make for added reliability.
Power output: 150 watts per channel into 8Ω (stereo)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 0.01%
Damping factor: 100
Input sensitivity: 1V
Signal to noise ratio: 115dB
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 2 x IC, 61 x transistors, 62 x diodes
Dimensions: 480 x 187 x 445mm
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Pioneer. If you wish to purchase a Spec-4 please contact the company via their website or visit an authorised retailer.
Pioneer Power Amplifiers