Pioneer SX-300
AM/FM Stereo Receiver (1974)

Description
The SX-300 is Pioneer's quality FM/MW stereo receiver for introduction to the world of stereo listening pleasure.
The unit features an FM linear dial scale and large tuning meter, FET equipped FM front end and 3-gang variable capacitor for better FM reception under all conditions. Precise RIAA equalisation is within 1dB
It can handle all your stereo needs, a turntable, tape deck, auxiliary units such as cartridge players etc.
Specifications
Tuning range: FM, MW
Power output: 7 watts per channel into 8Ω (stereo)
Frequency response: 30Hz to 20kHz
Total harmonic distortion: 1%
Damping factor: 20
Input sensitivity: 2.5mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 70dB (MM), 80dB (DIN), 80dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 1 x FET, 31 x transistors, 23 diodes
Dimensions: 441 x 132 x 324mm
Weight: 6kg
Accessories: FM T-type antenna
Downloads
instruction/owners manual (de)
instruction/owners manual (en)
If you have additional documentation please consider donating a copy to our free archive.
Please login or register a free account to download files
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Pioneer. If you wish to purchase a SX-300 please contact the company via their website or visit an authorised retailer.


