Mono Block Power Amplifier
The Quad 50E is a single channel amplifier designed for Broadcast, Recording and other applications in the audio industry.
The amplifier is virtually proof against misuse and no harm can be caused by such factors as gross overload, continuous operating on hot circuits, heavy reactive loading, inadequate ventilation etc.
If misuse is such as to cause excessive heating, the maximum power will reduce as necessary, restoring automatically when more normal conditions prevail.
The standard of quality is of the highest order and with any complex input, distortion falling within the useful part of the audio range will not exceed a small fraction of one percent.
Overloading with any load will not significantly affect long time constants, ensuring immediate recovery and minimum distortion resulting from such overload.
Power output: 50W into 8Ω (mono)
Frequency response: 30Hz to 20kHz
Total harmonic distortion: 1%
Input sensitivity: 0.5V
Signal to noise ratio: 80dB
Speaker load impedance: 5.5Ω (minimum)
Dimensions: 120 x 159 x 324mm
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Quad. If you wish to purchase a 50E please contact the company via their website or visit an authorised retailer.
Quad Power Amplifiers