Stereo rack mount power amplifier for professional applications
The Quad 520 is a two channel 100 to 150 watt amplifier for 19 inch 2U rack mounting.
Intended to drive loudspeaker loads the amplifier will deliver up to 100 watts into 8 ohm or 150 watts into 4 ohm with very low distortion.
Input sensitivity is 0.5 Vrms for full output with a lockable gain control.
Balance inputs can be provided to special order.
The standard of quality of the amplifier is of the highest order, and with any complex input distortion falling within the useful part of the audio range will not exceed a small fraction of one percent.
Overloading with any load will not significantly affect long time constants, ensuring immediate recovery and minimum distortion resulting from such overload.
Power output: 100 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.1%
Input sensitivity: 0.5V
Signal to noise ratio: 115dB
Dimensions: 482.6 x 88 x 310mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.