Quad 99 FM
Bus powered Tuner, 88-108 MHz (use only with 99 Series Pre-Amplifier)
The Quad 99 FM tuner connects to the rest of the Quad system via a Quadlink cable.
There are two 75 ohm co-axial sockets on the rear panel for aerial or cable signals.
It is a truism that the performance of your aerial is the performance of your tuner.
For best results, you should use a professionally installed multi-element FM aerial mounted on the roof, or at least in the loft space.
If you are very close to a transmitter you may get acceptable results from an indoor aerial, but reception could be noisy and distorted, particularly in stereo.
There is a line level phono output available for direct connection to the input of a DAT or tape recorder.
The front panel has 7 push buttons. The standby, cable, preset and mono buttons each have an LED indicator.
Type: Stereo Tuner
Tuning Bands: FM
Tuning Scale: Digital
FM Tuning Range: 88 to 108 MHz
Signal to Noise Ratio: 67dB (FM)
Distortion: 0.05% (FM)
Dimensions: 321 x 70 x 310mm
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Quad. If you wish to purchase a 99 FM please contact the company via their website or visit an authorised retailer.