hifi engine

Library / SAE

SAE E101

Computer Direct Line Parametric Equalizer

SAE E101

Description

The E101 is a dual-band parametric equalizer featuring SAE's unique Direct-Line concept plus digital readout of Level, Frequency and Bandwidth for both bands and 10 memory locations for each band.

For tape recording, it offers a tape monitor loop to replace the one used for the E101's operation, plus the capability to either pre-equalize, post-equalize or monitor the tape recorder in this loop.

The E101 also provides fully electronic control of the parametric circuit through the use of two On-board computers and extensive C-MOS technology. It is an extremely flexible equalizer.

Specifications

Output Level: 2.5V (9V max)

Frequency response: 20Hz to 20kHz

Signal to Noise Ratio: 100dB

Total harmonic distortion: 0.02%

Dimensions: 483 x 88.9 x 317.5mm

Weight: 20lbs

Downloads

instruction/owners manual (en) - dualref

schematics (en) - dualref

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

SAE Graphic Equalisers

Comments

 

This website is not affiliated with or sponsored by SAE. To purchase a E101 please contact the company via their website or visit an authorised retailer.