AM/FM Stereo Receiver (1976)
The Sansui 7070 is an advanced electronic design in the medium-power/medium-price range.
It has 65 watts, both channels driven into 8 ohms at 1000Hz, giving you adequate power to drive two sets of full-size speaker systems.
Features include a highly sensitive MOS FET FM front-end and a Dolby FM adaptor terminal.
Tuning range: FM, MW
Power output: 60 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 30kHz
Total harmonic distortion: 0.3%
Damping factor: 45
Input sensitivity: 2.5mV (mic), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MM), 80dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 8Ω
Dimensions: 502 x 156 x 371mm
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Sansui. If you wish to purchase a 7070 please contact the company via their website or visit an authorised retailer.
LO TENGO A UN MAGNIFICO - 10/10 by RGV0299
no comment - 7/10 by Fluffhead515
no comment - 10/10 by mehrangb