Stereo AM/FM Receiver (1978)
The 8080DB is a combination of power and sophistication in a stereo AM/FM receiver.
It outputs a stable 85 watts per channel and has a built in Dolby processor, triple tone controls and four accurate meters.
Tuning range: FM, MW
Power output: 85 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 30kHz
Total harmonic distortion: 0.1%
Damping factor: 30
Input sensitivity: 4mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 70dB (MM), 80dB (DIN), 80dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 150mV (line), 30mV (DIN), 0.775V (Pre out)
Dimensions: 540 x 182 x 397mm
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Sansui. If you wish to purchase a 8080DB please contact the company via their website or visit an authorised retailer.
I just got a Sansui 8080DB. I've had Marntz 2238 a 2285 and still own a 2250b. They were wonderful BUT what a huge surprise when I pushed the on button on the 8080DB. It has an amazing FM tuner section.... I can't even compare the reception.... it's off the hook...... GREAT!!! What a treat.... - 8/10 by Palko