AM/FM Stereo Receiver
Tuning range: FM, MW
Power output: 60 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 30kHz
Total harmonic distortion: 0.3%
Damping factor: 45
Input sensitivity: 2.5mV (mic), 2.5mV (MM), 100mV (DIN), 100mV (line)
Signal to noise ratio: 70dB (MM), 80dB (line)
Channel separation: 45dB (MM), 45dB (line)
Output: 100mV (line), 30mV (DIN)
Dimensions: 480 x 135 x 300mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Submitted by blancda
Have owned this receiver for 5 years and have enjoyed every minute of it. I have only turned it off a few times, otherwise it has been powered on the entire time and no issues other than 2 bulbs burned out. Minor bleed through of audio channels through the selector, but I don't expect perfection from a 38 year old piece. Here's to many more years of service!