Integrated Stereo Amplifier
Power output: 95 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 20kHz
Total harmonic distortion: 0.005%
Damping factor: 150
Input sensitivity: 0.1mV (MC), 2.5mV (MM), 250mV (line)
Signal to noise ratio: 74dB (MC), 90dB (MM), 110dB (line)
Channel separation: 80dB (MM), 50dB (MC), 80dB (line)
Output: 250mV (line)
Speaker load impedance: 8Ω (minimum)
Dimensions: 445 x 163 x 403mm
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Sansui. If you wish to purchase a AU-D9 please contact the company via their website or visit an authorised retailer.
Well I have two AU-D9s and when aligned properly they are some of the cleanest sound you'll ever hear. I biamp with them one amp per side to drive the bass w/ up to 95 watts and up to 95 more for the mids and highs. Oh, I drive Yamaha NS-1000Ms - 9/10 by nissanser91a