2-Track Recorder / Producer
No matter how elaborate a multichannel tape recorder is, it doesn't do the job without help.
A lot of equipment is involved, and a lot of talent as well.
The recorder becomes the keystone in a system that involves microphones, mixers, loudspeakers, amplifiers and many sophisticated electronic devices.
Everything contributes a part of the system of multichannel recording.
In the Tascam 32 general purpose 2 channel recorder/reproducer we have included the features, circuits and controls necessary for a wide variety of applications.
For example, true stereo remote recording with a minimum amount of extra equipment is made possible by the inclusion of microphone pre-amplifier, pads and headphone amps.
Track system: 2-track, 2-channel, stereo system
Heads: 2 x record/playback, 1 x erase
Motor: 2 x reel, 1 x capstan
Reel size: up to 10.5 inch reel
Equalization: NAB or IEC
Tape speeds: 7 1⁄2 15 ips
Wow and flutter: 0.06% (15 ips)
Frequency response: 40Hz to 22kHz (15 ips)
Signal to Noise Ratio: 68dB
Total harmonic distortion: 0.8%
Input: 300mV (line), 1mV (mic)
Output: 0.3V (line)
Dimensions: 410 x 461 x 256mm
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Tascam. If you wish to purchase a 32 please contact the company via their website or visit an authorised retailer.
Tascam Reel to Reels
Great! Awesome listening to my tapes I recorded in 1978! - 9/10 by dhwebber