hifi engine

Library / Technics

Technics RS-DC10

Digital Compact Cassette Deck

Technics RS-DC10

Specifications

Type: digital compact cassette deck

Track System: 2-channel stereo

Tape Speed: 4.76 cm/s

Recording Time: 90 minutes

Sampling Frequency: 48, 44.1, 32kHz

Frequency Response: 10Hz to 22kHz

Signal to Noise Ratio: 92dB

Dynamic Range: 92dB

Channel Separation: 80dB

Total Harmonic Distortion: 0.005%

Analogue Inputs: 60mV (line)

Analogue Outputs: 0.5V (line)

Digital Inputs: coaxial, optical

Digital Outputs: coaxial, optical

Dimensions: 430 x 153 x 341mm

Weight: 8.3kg

Accessories: remote control

Downloads

instruction/owners manual (en)

service manual (en)

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

the service manual is very

the service manual is very helpful.

as Philips model does not have any manual right now.

although the resolution is little bit low.

Rs-DC10

Thanx for the manual. I bought a deck 2nd hand and so far everything's working fine. Sound quality with analogy not as good as my NAD 602 especialy with Dolby B and C. I recon the DCC will definately show it's colors with digital recordings, now to try and found some DCC casettes!

Technics RS-DC10

Hello,
If it happends that you get no sound with your DCC recorder / player, I can hel you ( of course for free ).
One of my friend has a Philips DCC 900 which seems to be exactly the same than the Technics and I repaired it.
Good listening with your DCC.
Pascal from France

Marantz DD-82

Hi Pascal,

I already threw away 2 DCC-900 decks because they were completely mute. Now I think my beloved DD-82 is starting to act up. Your help would be very highly appreciated.

Ciao,
Paolo

Help with DCC

blueicon's picture

Hi!
My dcc w'ont play dcc tapes.Analog tapes play ok. Somebody can tell me how can fix this?
Thank's in advance!

marantz dd-92 dcc deck

Hi Pascal , I`m having the sound drop out problem ( sometimes intermittent, sometimes constant with no sound at all) and am getting really frustrated as the deck is as new and I know the heads are clean. Can you help me ?

Regards

Habib26

Pascal - I have that problem- can you help?

Hi Pascal, I have a Marantz DD-82 which again seems to be the same deck as the Technics RS-DC10 and the Philips 900. Suddenly I have no output from analogue or digital cassettes, I can however use the deck in monitor mode. Can you help me get my deck running again please?

DCC lost sound for short moments

Hello

I my Technics DCC happends (when is "hot" after 1 hour of playing) that it losts sound (for short moments). If it works longer it happends often and lost sound for longer. I have to turn off it, wait few hours and when is cold play again. Do You have any other solution. It's not confortable to can play music for 30 minutes one per day :)
Thanks for support

Technics RS-DC10

I have this unit that has the problem you mentioned,no sound with your DCC recorder /player, can you tell me how to fix this fault.
Thank you.

TECHNICS RS-DC10 / PHILIPS 900

man_nm's picture

Hello

Now DCC deck didn´t light up, after a few months listening music, two months ago the some tapes sound partially, after the tape didn´t change the side.

I took my deck to the Philips workshop, but they couldn´t repair it, because lack of parts, too old they say...

And finally this week the deck didn´t work at all

Can anyone help me?
Thanks

 

This website is not affiliated with or sponsored by Technics. To purchase a RS-DC10 please contact the company via their website or visit an authorised retailer.