Library / Yamaha

Yamaha CR-400

FM/AM Receiver

add a reviewadd a review

Yamaha CR-400

Specifications

Tuning range: FM, MW

Power output: 16 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 50kHz

Total harmonic distortion: 0.5%

Damping factor: 40

Input sensitivity: 3mV (mic), 3mV (MM), 150mV (line)

Signal to noise ratio: 65dB (mic), 72dB (MM), 85dB (line)

Channel separation: 50dB (MM), 50dB (line)

Output: 150mV (line), 0.2V (Pre out)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 4 x IC, 3 x FET, 38 x transistors, 22 x diodes, 1 x zener diodes, 2 x LED

Dimensions: 444 x 158 x 300mm

Weight: 9.5kg

Downloads

instruction/owners manual (en)

service manual (en) - drabina


If you have additional documentation please consider donating a copy to our free archive.


Please login or register a free account to download files


NOTE If you are having problems opening files please read this thread.

All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Yamaha. If you wish to purchase a CR-400 please contact the company via their website or visit an authorised retailer.

Yamaha Receivers

User Reviews

I have had this receiver since the early '70's. Bought it new & paid like $350 for it then. Best electronic equipment I have ever owned. Sounds as good now as when it was new. Left channel has gone out recently and looking to get it fixed so I can continue to enjoy it. - 10/10 by ghostrider05

Comments

Manuals for Yamaha CR 400

Submitted by norbach12 on Fri, 2012-05-25 20:50.

I can't describe how happy I am to get these manuals. I have a working unit and this completes it.

Thanks a lot, HiFi Engine.

Basil