FM/AM Stereo Receiver
Tuning range: FM, MW
Power output: 45 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.1%
Damping factor: 70
Input sensitivity: 3mV (mic), 3mV (MM), 150mV (line)
Signal to noise ratio: 70dB (mic), 75dB (MM), 90dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 150mV (line), 0.775V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 2 x IC, 3 x MOSFET, 98 x transistors, 60 x diodes, 6 x zener diodes, 3 x LED
Dimensions: 474 x 158 x 300mm
If you have additional documentation please consider donating a copy to our free archive.
NOTE If you are having problems opening files please read this thread.
All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Yamaha. If you wish to purchase a CR-800 please contact the company via their website or visit an authorised retailer.