hifi engine

Manual Library / ADC

ADC Sound Shaper SS-315X

Stereo Frequency Equalizer

add a review add a review

ADC Sound Shaper SS-315X


Audio Dynamics Corporation (ADC) is proud to provide the ultimate value in design and development of a 10-band graphic equalizer with a real time frequency spectrum analyser, the Sound Shaper SS-315X for your superior sound analysis.

The Sound Shaper SS-315X uses a fluorescent indicator tube which has 100 separate segments plus 10 segments average response indicator for display to analyse sound source frequencies and room acoustics.

Audio fans and music enthusiasts like yourself look forward to be able to enjoy the highest possible degrees of sound quality when listening to their favourite music.


Input Sensitivity: 1V (7V max)

Output Level: 1V (7V max)

Gain: ± 1dB

Frequency response: 5Hz to 100kHz

Signal to Noise Ratio: 100dB

Total harmonic distortion: 0.008%

Control Range: ± 15dB

Frequency Bands: 31.5, 63, 125, 250, 500, 1K, 2K, 4K, 8K, 16KHz

Dimensions: 435 x 222 x 88mm

Weight: 4.3kg


instruction/owners manual   English -

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


ADC SS-315X mic

Can somebody tell me what kind is the original mic for this EQ machinery (SS-315X) and where can I get one?

ADC ss-315x mic

First let me say, never use a typical looking type mic,like singers use called dynamic mic as this will damage your unit! Most pink noise type mic have a look about the size of a pencil ,called an Omni-directional electret condenser, specks for this unit call for impedance @ 1khz 2.2 kohm.,sensitivity 0db-1V/microbar,-70db,,frequency response compensated 50 to 13,000Hz,,bias 1.5V dc,,you may use this to search the Web, "pink noise mic",,or take these specks to a place like guitar center,,they will have access as they sell spectrum analyzers which come with these type of mic,,,check with local sound company, they use spec. analyzers all the time,,as long as the cable has the 1/4" plug and meets these specs your good..


I have a dead channel. Does anyone have schematic or repair manual for this ? How about actual IC replacement crossover numbers ?
Many thanks !!

ADC Sound Shaper SS-315

Strangely, the 315 is not the same as the 315X; different (more) rear panel jackfield.....

This website is not affiliated with or sponsored by ADC. To purchase Sound Shaper SS-315X spares or accessories, please contact the company via their website or visit an authorised retailer.