30W Car Audio Power Amplifier
The Adcom GFA-4302 uses class A operation to the MOS Fets with all gain stages up to the outputs in pure, single ended (assymetric) class A, the purest operation mode.
Power output: 30 watts per channel into 4 ohms (100 watts mono)
Frequency response: 0Hz to 50kHz
Signal to noise ratio: 100dB
Channel separation: 90dB
Damping factor: 350
Input sensitivity: 400mV to 2V
Idle current: 3A
Dimensions: 9.85 x 10.75 x 2.3 inches
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.