hifi engine

Manual Library / Akai

Akai UC-U2

Stereo Integrated Amplifier

add a review add a review

Akai UC-U2

Specifications

Power output: 23 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.06%

Damping factor: 40

Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 75dB (MM), 90dB (line)

Channel separation: 50dB (MM), 55dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 20 x transistors, 19 x diodes, 4 x IC, 10 x LED

Dimensions: 280 x 69 x 280mm

Weight: 4.5kg

Downloads

service manual  English - pachinko

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


Comments

This website is not affiliated with or sponsored by Akai. To purchase UC-U2 spares or accessories, please contact the company via their website or visit an authorised retailer.