DC Stereo Power Amplifier (1980-82)
Power output: 35 watts per channel into 8Ω (stereo)
Frequency response: 6Hz to 60kHz
Total harmonic distortion: 0.005%
Damping factor: 100
Signal to noise ratio: 115dB
Speaker load impedance: 4Ω to 16Ω
Dimensions: 280 x 56 x 284mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Sep 06th, 2015 by mspw
The THD recorded above for this amplifier are not quite accurate and reflect the specs of the pre-amp (which is a separate component). According to the service manual the amplifier THD is 0.01 @13W 8ohm.
Reviewed Sep 05th, 2015 by Provinspoul
It is much like the pa-w04 just a little one.