Reel to Reel/Cartridge/Cassette Combination Stereo Tape Recorder
The Akai X-2000S features 4-track stereo/monaural recording/playback, two IC main plus two IC preamplifier, transfer from reel to cartridge or cassette and a cross-field head.
The cartridge section features 8-track recording/playback and one hour continuous performance, while the cassette section features 4-track stereo recording/playback.
Track system: 4-track, 2-channel, stereo/monaural system
Motor: 2 speed condenser
Reel size: up to 7 inch reel
Tape speeds: 1 7⁄8 3 3⁄4 7 1⁄2 ips
Wow and flutter: 0.09% (7 1⁄2 ips)
Frequency response: 30Hz to 23kHz (7 1⁄2 ips)
Signal to Noise Ratio: 50dB
Input: 25mV (line), 0.15mV (mic)
Output power: 12 watts
Speakers: 2 x 4"
Semiconductors: 13 x transistors, 16 x diodes, 4 x IC
Dimensions: 350 x 465 x 270mm
Note: optional 15ips adaptor kit
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Jan 08th, 2015 by tricehl
Out of all the Reel to reels I now own, this unit was a reel time consuming unit to replace belts on! But after it was done, and all the switches and controls were well cleaned, it performed as if it just came out of it's shipping box! Really fun to show it off to others as this is an unusual deck.