Alba UA 700
Solid State Integrated Amplifer
The UA 700 is a high quality, fully integrated audio amplifier.
It will take a wide range of inputs, selected by push buttons including Mic, Aux, Tuner and Pickup.
The Pickup used can be either magnetic or ceramic, while the Aux socket will also provide an output to operate a stereo tape recorder.
The power amplifier of the UA 700A is directly coupled, giving full power down to the lowest frequencies (20Hz).
By use of silicon transistors throughout, this power is maintained to above 30kHz.
A high feedback factor or 60dB ensures low distortion at all levels of output.
Power output: 15 watts per channel
Frequency response: 30Hz to 18kHz
Total harmonic distortion: 0.1%
Input sensitivity: 2.3mV (mic), 5mV (MM), 60mV (ceramic), 100mV (line)
Signal to noise ratio: 55dB (MM), 63dB (line)
Output: 120mV (line)
Semiconductors: 20 x transistors
Dimensions: 425 x 102 x 194mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.