hifi engine

Manual Library / Allied Radio Corporation

Allied Radio Corporation Model 399

Solid State Stereophonic Receiver

add a review add a review

Allied Radio Corporation Model 399

Description

The Model 399 is a complete stereophonic instrument incorporating an AM/FM tuner with built-in multiplex circuitry for reception of FM stereo multiplex broadcasts, a full control audio preamplifier, and a high fidelity two channel audio power amplifier in a single compact unit.

The simple addition of speakers is all that is necessary to ready the Model 399 for high fidelity reception and reproduction of standard AM and FM broadcasts and stereophonic FM multiplex broadcasts.

Plug-in connections are provided for adding tape recording and record playback equipment at any time.

Specifications

Tuning range: FM, MW

Power output: 43 watts per channel into 4Ω (stereo)

Frequency response: 18Hz to 60kHz

Total harmonic distortion: 0.5%

Damping factor: 30

Input sensitivity: 3mV (MM), 250mV (line)

Signal to noise ratio: 65dB (MM), 80dB (line)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 16-5/8 x 5 x 12 inches

Weight: 25lbs

Downloads

instruction/owners manual   English - Tobi_2012

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

This website is not affiliated with or sponsored by Allied Radio Corporation. To purchase Model 399 spares or accessories, please contact the company via their website or visit an authorised retailer.