Stereo Power Amplifier (1983)
Features of the BGW 8000 amplifier include Toroid power transformer, forced air cooling, power switch, circuit breaker, input level controls, modular construction, display meter assembly, dual looping 1/4 phone jacks, and electronic DC speaker protection.
The front panel includes two input level controls, rocker AC power switch and dual colour LED display.
Green LED's indicate power ON, yellow indicate signal presence and are labelled modulation, and red serve as overload indicators.
Power output: 225 watts per channel into 8Ω (stereo), 700W into 8Ω (mono)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.5%
Damping factor: 200
Input sensitivity: 1.23V
Signal to noise ratio: 110dB
Speaker load impedance: 2Ω (minimum)
Semiconductors: 64 x transistors, 32 x diodes, 6 x LED, 2 x Triacs, 5 x zener diodes
Dimensions: 133 x 483 x 330mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.