hifi engine

Manual Library / Carver

Carver M-1.0t

Magnetic Field Power Amplifier

add a review add a review

Carver M-1.0t


The Carver M-1.0t magnetic field amplifier was released in June of 1986.

The original version of the amplifier had inverting outputs, that is the right channel output is inverted (180 degrees) from the left channel output.

Starting at serial number 4500 (or 70100000), the amplifier was redesigned to include a stereo/mono switch which inverts the right channel for bridged mono use.

In normal stereo operation both channels are in phase.


Power output: 200 watts per channel into 8Ω (stereo), 1000W into 8Ω (mono)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.15%

Damping factor: 9

Gain: 27 dB

Input sensitivity: 1.75V

Signal to noise ratio: 100dB

Dimensions: 95 x 483 x 343mm

Weight: 8.6kg

Year: 1986


service manual   English -

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Carver. To purchase M-1.0t spares or accessories, please contact the company via their website or visit an authorised retailer.