hifi engine

Manual Library / Carver

Carver PM-600

Magnetic Field Power Amplifier

add a review add a review

Carver PM-600


This power amplifier's lightweight and rugged construction makes it ideal for touring and permanent installations.

A growing range of add-on cards are available to further enhance the PM-600's versatility.

These include the PMX 2-way electronic crossover, PG2 Dual Zone Paging module, PMT-2 Balanced Input as well as external 70.7 volt transformers.


Power output: 200 watts per channel into 8Ω (stereo), 700W into 8Ω (mono)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.5%

Damping factor: 150

Gain: 28.5 dB

Input sensitivity: 1.5V

Signal to noise ratio: 106dB

Speaker load impedance: 4Ω (minimum)

Dimensions: 3.5 x 19 x 13.75 inches

Weight: 10.2kg


instruction/owners manual   English -

service manual   English - SEQURA

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


Need Service Manual

Schematics for carver pm600

PM-600 Schematic

I have the manual with schematic included. I'll dig it out and upload it.

PM-600 Schematic

Could you send me your email add, I will send to you.
Best regards,

This website is not affiliated with or sponsored by Carver. To purchase PM-600 spares or accessories, please contact the company via their website or visit an authorised retailer.