hifi engine

Manual Library / Creek

Creek 4140

Stereo Integrated Amplifier

add a review add a review

Creek 4140


  • Power output: 35 watts per channel into 8Ω (stereo)

    Frequency response: 20Hz to 20kHz

    Input sensitivity: 0.1mV (MC), 2.5mV (MM), 250mV (line)

    Signal to noise ratio: 79dB (MM), 79dB (line)

    Channel separation: 50dB (MM), 46dB (line)

    Dimensions: 420 x 185 x 60mm

    Weight: 5kg

  • Power output: 30 watts per channel into 8Ω (stereo)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.1%

    Input sensitivity: 0.1mV (MC), 2mV (MM), 250mV (line)

    Signal to noise ratio: 62dB (MC), 70dB (MM), 85dB (line)

    Channel separation: 50dB (MM), 40dB (MC), 50dB (line)

    Speaker load impedance: 4Ω (minimum)

    Dimensions: 420 x 64 x 220mm

    Weight: 4.5kg


S2 brochure   English - hifi-tuning

S2 pre section schematic   English - hifi-tuning

S2 power section schematic   English - hifi-tuning

instruction/owners manual   English - Jeepo65

S2 instruction/owners manual   English - Jeepo65

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Creek. To purchase 4140 spares or accessories, please contact the company via their website or visit an authorised retailer.