hifi engine

Manual Library / Cybernet

Cybernet CR-110

AM/FM Stereo Receiver

add a review (1 review)

Cybernet CR-110


Every good product is built for a special reason, The Cybernet CR-110 stereo receiver is no exception. No doubt about that it was built to handle a sophisticated stereo system like professionals. It is a luxury receiver created without compromise.

The FM section has a usable sensitivity of 10.3 dBf obtained through a high grade 4-gang tuning capacitor in the front-end and three pairs of linear phase ceramic filters ensure good band pass response.

A low pass filter is employed to prevent carrier leakage and a specially selected phase-lock loop IC ensures stability, low distortion and excellent S/N ratio. A constant voltage supply is used for further stability.

A reflected-light dial scale is adapted for the front panel to enhance the unit's distinguished design and a heavy flywheel in its tuning mechanism provides easy and smooth operation.

Two large luminous meters, a signal and a tuning meter show the signal strength on reception and the tuning meter indicates the best performing point at its centre-position.

All inputs such as 2 phonos, Auxiliary, AM and FM are available via the front panel selector switch.

The input stage employs a 2-stage directly coupled amplifier utilizing high quality transistors to ensure good linearity and high overload margin.

Direct coupled DC output configuration in the power section of the amplifier ensures excellent bass, minimum distortion and outstanding transient response.

Because there are various types of cartridges the phono sensitivity can be adjusted by a switch on the rear panel.


Tuning range: FM, MW

Power output: 55 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.2%

Damping factor: 35

Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 65dB (MM), 90dB (line)

Output: 150mV (line), 30mV (DIN)

Semiconductors: 8 x IC, 1 x FET, 31 x transistors

Dimensions: 500 x 164 x 350mm

Weight: 14kg


instruction/owners manual   English - peewee10

schematic   English - peewee10

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed May 10th, 2016 by thomo57

Having picked up one of these beautifully built receivers l couldn't believe the sound quality.
Outstanding to say the least.
I have a mate who dropped over.
He's Into high end gear like Martin Logan speakers and big power amps.
When he walked through the door l had the CR 110 playing and he immediately was drawn to it.
I'm no audio or sound technician and have recently gotten into valve units but I'll never part with my Cybernet
The sound is smooth and a joy to listen to.
The look and feel of this thing has quality written all over it.
I love my Cybernet



This website is not affiliated with or sponsored by Cybernet. To purchase CR-110 spares or accessories, please contact the company via their website or visit an authorised retailer.