Stereo Power Amplifier
Incorporating four independent power amps, the BX-3 functions as a stereo amplifier, a 3-channel amplifier or a 4-channel amplifier, and up to four pairs of speaker systems can be driven at a time.
Power output: 180 watts per channel into 8Ω (stereo), 550W into 8Ω (mono)
Frequency response: 1Hz to 200kHz
Total harmonic distortion: 0.003%
Damping factor: 50
Input sensitivity: 1.2V
Signal to noise ratio: 115dB
Speaker load impedance: 2Ω to 16Ω
Dimensions: 18.75 x 5.75 x 16 inches
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed May 25th, 2012 by Dave Meckanic
This amplifier is a beast. A little wide for a 19 rack but I took the sides off and made new mounts/ears. I am running a 4 buss mixer through a 4channel compressor/expander into the bx-3 and she performs like a charm. Never had an issue except the front lights. I have been using it in a studio as my monitor driver for 8 years. It's a very under rated amplifier for some reason but it has performed consistently for me.