Audio Video Surround Amplifier
Power output: 125 watts per channel into 8Ω (stereo)
Surround output: 125W (front), 125W (center), 125W (rear)
Frequency response: 10Hz to 100kHz
Total harmonic distortion: 0.05%
Input sensitivity: 2.5mV (MM), 200mV (line)
Signal to noise ratio: 74dB (MM), 105dB (line)
Speaker load impedance: 6Ω to 16Ω
Digital inputs: optical, coaxial
Video Connections: composite, SVHS
Dimensions: 434 x 181 x 494mm
Accessories: RC-869 remote control unit
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed May 05th, 2016 by Braam van Zyl
Superb Audio on Pure Direct.
Just make sure you select Large front speakers or you will be disappointed.
Many users make that mistake and blame the unit for flat sound.
Reviewed Aug 06th, 2015 by Tonybro
I have had this AV amp and the associated POA-T10 power amp since the late 1990s and I still use it today.
For films it is fantastic, I use it with Bower & Wilkins MT-50 speakers (sat/sub). OK, it doesn't have HD video capabilities but then I have never used the amp to switch video sources, these have always gone straight to the TV. It also doesn't have the latest Dolby and DTS decoders (but it does 7.1) and let's be honest, trying to get acceptance for 5.1 is bad enough in the lounge, anything more is just a non-starter with most spouses!
The THX adds some more oomph to soundtracks and the flexibility of the digital inputs is great.
I wouldn't sell my pairing for the world!