Stereophonic Master Control Amplifier
In developing the TX-300, our advanced engineering groups were determined to combine a versatile preamplifier with unusually low distortion and noise, and a power amplifier capable of exceptionally clean reproduction at all levels.
This combination of design results in a master control amplifier capable of precisely reproducing the most delicate nuances of a violin solo, or of meeting the huge power demands of an orchestral crescendo.
Power output: 36 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 25kHz
Total harmonic distortion: 0.5%
Input sensitivity: 2.2mV (mic), 2.8mV (MM), 200mV (line)
Signal to noise ratio: 86dB (line)
Channel separation: 55dB (line)
Dimensions: 384 x 122 x 305mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.