hifi engine

Manual Library / Fostex

Fostex 5030

Line Amplifier

add a review add a review

Fostex 5030


The Model 5030 Line Amplifier is designed to allow interfacing between -4dBV balanced lines and -10dBV unbalanced lines.

It features eight input and eight output line amplifiers. In addition, there are two banks of switches on the rear panel. One bank is for adjusting the polarity of XLR connector at the same time inputs and outputs.

For best results, please be sure that polarity is correct by using these switches. The second bank of switches is for changing the nominal level. These switches are only effective between unbalanced inputs and outputs. With these switches, you may choose between -6dBV or-10dBV.


Circuit: electronic balanced circuit

Nominal level: -10dBV or -6DBV

Frequency response: 20Hz to 30kHz

Total harmonic distortion: 0.02%

Signal to noise ratio: 92dB

Dimensions: 482 x 165 x 90mm


instruction/owners manual   English - audio-addict

service manual   English - audio-addict

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Fostex. To purchase 5030 spares or accessories, please contact the company via their website or visit an authorised retailer.