hifi engine

Manual Library / Grundig

Grundig TK 2200

Portable Tape Recorder (1968-69)

add a review add a review

Grundig TK 2200


Grundig's new TK2200 was designed for perfect recording and playback, anywhere.

Inside the sturdy pressure diecast case there's a sophisticated electronic assembly to achieve just that.

Note the two contra rotating flywheels to stabilise tape speed, the brushless DC motor, and the fully transistorised circuit.

This quality machine operates at 3-3/4 and 1-7/8 ips, and will take 5" spools, giving four hours playback time.

Recordings can be monitored through the built-in loudspeaker or through headphones.

Stop/start can be remote controlled from the microphone, and other handy features include a temporary pause button, tape-position indicator, VU recording level meter, and automatic stop.

The TK2200 will even convert to mains power supply, using the Grundig TN12A power pack (optional extra).


Track system: 2-track, single channel, monaural system

Reel size: up to 5 inch reel

Tape speeds: 1 78  3 34 ips

Wow and flutter: 0.25% (3 34 ips)

Frequency response: 40Hz to 15kHz (3 34 ips)

Signal to Noise Ratio: 47dB

Input: 80mV (line), 0.25mV (mic)

Output: 0.5V (line)

Output power: 2 watts

Speakers: 1 x 5.75x3.75"

Semiconductors: 18 x transistors, 9 x diodes

Dimensions: 13.75 x 8.5 x 4.5 inches

Weight: 10lbs

Year: 1969


service manual   Deutsch - fritsch2

Related Catalogues

Tape Recorders


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Grundig. To purchase TK 2200 spares or accessories, please contact the company via their website or visit an authorised retailer.