hifi engine

Manual Library / Heathkit

Heathkit W-3AM

Tube Power Amplifier

add a review add a review

Heathkit W-3AM


The Heathkit model W-3AM is free running with no controls.

It is designed to be used with a signal source having its own controls or with a preamplifier.

The Heathkit model WA-P2 Preamplifier is highly recommended.


Power output: 20W into 8Ω (mono)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 1%

Damping factor: 14

Signal to noise ratio: 85.3dB

Speaker load impedance: 4Ω to 16Ω

Valve complement: 2 x 6SN7GT, 2 x 5881, 1 x 5V4G

Dimensions: 7 x 5.5 x 11 inches

Weight: 29lbs


assembly/operation manual   English - autoteck1

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Heathkit. To purchase W-3AM spares or accessories, please contact the company via their website or visit an authorised retailer.