hifi engine

Manual Library / HH Scott

HH Scott LK-48

Stereo Integrated Amplifier (1961)

add a review add a review

HH Scott LK-48


The LK-48 is a complete two-channel stereo amplifier consisting of dual 24 watts power amplifiers and dual preamplifiers on a single chassis.

All of the luxury features you expect in HH Scott amplifiers are here, including all aluminium chassis, DC operated heaters for lowest hum, special channel balance facilities, provisions for tape monitoring and derived center channel output.


Power output: 24 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.8%

Input sensitivity: 3mV (MM), 500mV (line)

Speaker load impedance: 4Ω to 16Ω

Valve complement: 4 x 12AX7, 4 x 7189A, 2 x 7199, 1 x GZ34

Dimensions: 15.5 x 5.25 x 13.25 inches

Year: 1961


instruction book   English - danickd

schematic   English - karodimitrov

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: LK-48

Does anyone have the schematic?

This website is not affiliated with or sponsored by HH Scott. To purchase LK-48 spares or accessories, please contact the company via their website or visit an authorised retailer.