HH Scott LT-110
FM Stereo Multiplex Tuner Kit (1961)
Now you can build your own HH Scott Wide Band Multiplex Tuner for flawless reception of new FM Stereo broadcasts. HH Scott tuners are used for off-the-air monitoring by virtually every FM Multiplex station in both the United States and Canada.
You too can enjoy the advantages of Scott time-switching multiplex circuits which have clearly demonstrated their superiority over conventional design. Time-switching results in lowest distortion, highest separation, and flawless tape recording.
The highly critical multiplex and sensitive silver-plated front end sections are pre-wired and pre-aligned at the factory. No external alignment equipment is necessary to achieve the highest professional performance standards from this fine tuner. Special shielded Wide-Band IF's allow stereo separation to match stringent FCC transmission specifications. Heavy layer of pure copper, bonded to the aluminium chassis, assures years of trouble-free performance.
The performance of the LT-110 is identical to the famed LT-10 which has been hailed by critics and customers alike as the most sensitive tuner kit available.
Type: Mono/Stereo Tuner
Tuning Bands: FM
Tuning Scale: Analogue
FM Tuning Range: 88 to 108 MHz
Sensitivity: 2.2uV (FM)
Signal to Noise Ratio: 60dB (FM)
Distortion: 0.8% (FM)
Frequency response: 30Hz to 15kHz (FM)
Valve complement: 1 x 6BS8, 1 x 6U8, 3 x 6AU6, 1 x 6X4, 1 x 12AT7, 2 x 12AU7, 1 x 6BL8
Dimensions: 15.5 x 5.25 x 13.25 inches
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.