hifi engine

Manual Library / Hitachi

Hitachi HTA-DD3

Audio Video Surround Receiver (2000)

add a review add a review

Hitachi HTA-DD3


Tuning range: FM, MW

Power output: 80 watts per channel into 6Ω (stereo)

Surround output: 80W (front), 80W (center), 80W (rear)

Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.1%

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 74dB (MM), 93dB (line)

Speaker load impedance: 6Ω to 16Ω

Digital inputs: optical

Video Connections: component, composite, SVHS

Dimensions: 434 x 144 x 320mm

Weight: 8.1kg

Accessories: RB-DD1S remote control

Year: 2000


service manual   English - Ivy Caudieus

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Hitachi. To purchase HTA-DD3 spares or accessories, please contact the company via their website or visit an authorised retailer.