Stereo Integrated Amplifier (1979-80)
Power output: 60 watts per channel into 8Ω (stereo)
Frequency response: 1Hz to 100kHz
Total harmonic distortion: 0.005%
Damping factor: 75
Input sensitivity: 0.2mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 67dB (MC), 84dB (MM), 109dB (line)
Output: 150mV (line)
Dimensions: 121 x 474 x 345mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed May 12th, 2015 by SteveD833
Great site. Appreciate the manual's.
I have 2 JVC AX-4 class A/B amplifiers. One I bought new back in 1980 and still own, and a second I recently bought on eBay from a gentleman in London, England. Fantastically clean-sounding amps with tons of clear headroom.
Reviewed Apr 28th, 2014 by trimmerman
I just got it. I just hooked it up for the first time today. I was curious when it was made. I thought I saw listings for it before and I thought it was around 1980. I think 60 watts RMS/channel is a little optimistic considering the infiniti specs they are bragging about but it sounds pretty good. That five band EQ is mostly for looks. My first JVC didn't last very long. This one has already stood the test of time so I thought it was worth a try. Besides, JVC owes me. It think it will be OK.