Stereo Integrated Amplifier (1976)
Power output: 40 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 30kHz
Total harmonic distortion: 0.06%
Damping factor: 30
Input sensitivity: 2.5mV (MM), 160mV (line)
Signal to noise ratio: 65dB (MM), 85dB (line)
Output: 160mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 152 x 390 x 330mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed May 29th, 2015 by anderscastle
Found this little gem at a yardsale. Paid a small amount, and thought this could only surprice me in a positive way i had nothing to Loose.
And i did surprice me and in a Big Way! Only rated at 40 watt but what a Sound this little thing has. Rich and full and the Phono stage is great! Sounding. If you find one, just buy it, it Will surprice you.