hifi engine

Manual Library / JVC


4 Channel Integrated Amplifier

add a review add a review



The JVC MCA-V9E features all stage direct-coupled OCL circuitry. Four completely complementary OCL power amplifiers are built in.

Specifically designed for 4 channel reproduction, but also usable for multi channel amplification, SFCS effect and for driving two pairs of stereo speakers in 2 channel reproduction.


Power output: 55W/ch into 8Ω (stereo), 25W/ch into 8Ω (quadraphonic)

Frequency response: 20Hz to 50kHz

Total harmonic distortion: 0.08%

Damping factor: 50

Input sensitivity: 2mV (MM), 100mV (line)

Signal to noise ratio: 76dB (MM), 84dB (line)

Speaker load impedance: 8Ω to 16Ω

Dimensions: 5-3/8 x 16-1/2 x 14-1/4 inches

Weight: 29.8lbs


instruction/owners manual   English -

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by JVC. To purchase MCA-V9E spares or accessories, please contact the company via their website or visit an authorised retailer.