Kenwood Basic M1A
Stereo Power Amplifier (1987-90)
Power output: 110 watts per channel into 8Ω (stereo)
Frequency response: 1Hz to 300kHz
Total harmonic distortion: 0.004%
Damping factor: 1000
Input sensitivity: 1V
Signal to noise ratio: 120dB
Speaker load impedance: 4Ω to 16Ω
Dimensions: 440 x 133 x 318mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Oct 28th, 2013 by didibug
A great amp with good budget. Great sound, very dynamic and provide a large scene.
Reviewed Oct 07th, 2012 by Smoke Screen
Despite beeing a chip-amp this poweramp was one
of the few realy good budget offerings in that
field. Nowadays second hand mostly overpriced.