hifi engine

Manual Library / Kenwood

Kenwood KA-1400

Stereo Integrated Amplifier (1975-76)

add a review add a review

Kenwood KA-1400


Power output: 15 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 40kHz

Total harmonic distortion: 0.8%

Damping factor: 30

Input sensitivity: 3mV (mic), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 68dB (mic), 68dB (MM), 80dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 372 x 125 x 251.5mm

Weight: 5.3kg


B/G schematic   English - Ivy Caudieus

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


Transcendia's picture

re: KA-1400

I used this for awhile and it was okay. Old I never expected much. My "repaired" NAD lost the channel again. I'll open the thing up and put mechanic all oil on parts that move, and see if it is repaired far as things happening with knobs and switches.

This website is not affiliated with or sponsored by Kenwood. To purchase KA-1400/KA-1400B spares or accessories, please contact the company via their website or visit an authorised retailer.