Solid State Stereo Integrated Amplifier
Power output: 13 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 30kHz
Total harmonic distortion: 0.8%
Damping factor: 50
Input sensitivity: 2mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 60dB (MM), 70dB (DIN), 70dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 13 x 4 x 9 inches
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Feb 11th, 2015 by BilboBaggins
This is about my second KA-2002A amplifier. The same would apply with my first. I am always playing with different components, and this little amplifier has an amazing amount of power for only a 13 Watt amp. It drives with impressive power some very difficult speaker loads. It includes 2 phono inputs, auxiliary, tuner, and 2 tape inputs. I, for one, am quite impressed by this little work horse.