Solid State Stereo Amplifier
The Kenwood KA-4000 is a 100 watt marvel that can drive even the lowest efficiency Hi-Fi speakers and boasts a wide power bandwidth of 13 Hz to 30,000 Hz with an absolute low in IM distortion.
The KA-4000's lever type 20dB muting switch brings quick quiet change in output for temporary silence during telephone calls, etc. Also 2dB step type tone controls and blue light indicators for input selector switch.
Power output: 32 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 50kHz
Total harmonic distortion: 0.5%
Damping factor: 27.5
Input sensitivity: 2mV (mic), 2mV (MM), 200mV (line)
Signal to noise ratio: 67dB (mic), 65dB (MM), 77dB (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 408 x 134 x 280mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Apr 24th, 2014 by Rsarralde
Un excelente equipo. Muy limpià³, nàtido y fresco